LHSimulations

LHSimulations => Product Support/Termék támogatás => English => Topic started by: ESGG on November 08, 2017, 20:35:53 PM

Title: No buildings, no lights
Post by: ESGG on November 08, 2017, 20:35:53 PM

I just installed from Simmarket, ver 13, build 15. I have no buildings (only the jetways) and no runway or taxilights. Everything installs as it should. I get no failures or messages that something is wrong during installation.

Regards
Johnny

Title: Re: No buildings, no lights
Post by: tsGucci on November 08, 2017, 20:47:11 PM

Could you please try to install SimConnect SP1 and SP2?

Here are the linkst:

https://drive.google.com/file/d/0ByD3shUNinyfSXdnS2VpT1ZNU0E/view?usp=sharing

https://drive.google.com/file/d/0ByD3shUNinyfN3pIdTVSYmNaX3c/view?usp=sharing

Title: Re: No buildings, no lights
Post by: Scriptless on November 11, 2017, 17:48:36 PM

Same for me, Build 13 & 15 didn't work for me, both builds have no buildings (only the jetways).
Objectplacer entry exists in dll.xml.
P3D v4

Title: Re: No buildings, no lights
Post by: tsGucci on November 15, 2017, 19:59:51 PM

Quote from: Scriptless on November 11, 2017, 17:48:36 PM

Same for me, Build 13 & 15 didn't work for me, both builds have no buildings (only the jetways).
Objectplacer entry exists in dll.xml.
P3D v4

Any error message during installation or Prepar3D startup?

Title: Re: No buildings, no lights
Post by: Scriptless on November 17, 2017, 14:17:28 PM

Quote from: tsGucci on November 15, 2017, 19:59:51 PM

Any error message during installation or Prepar3D startup?

no errors

Title: Re: No buildings, no lights
Post by: xerox on November 23, 2017, 01:17:28 AM

Same here: no buildings, only the jetways. No error during installations.
What was strange, the scenery was not added automatically to the library, I needed to add manually...

Tibor

Title: Re: No buildings, no lights
Post by: tsGucci on November 23, 2017, 14:38:06 PM

Could you please do some logs for us:
Follow the second video:
http://lhsimulations.com/forum/index.php?topic=436.0

Title: Re: No buildings, no lights
Post by: xerox on November 23, 2017, 19:18:09 PM

Quote from: xerox on November 23, 2017, 01:17:28 AM

Same here: no buildings, only the jetways. No error during installations.
What was strange, the scenery was not added automatically to the library, I needed to add manually...

Tibor

My problem has been solved!
In fact I have not started the scenery configurator after the installation. Now by starting it gave me a message to increase the mess resolution below 5m in the P3D. I did it and now the scenery looks perfect!

Thanks,
Tibor

Title: Re: No buildings, no lights
Post by: tsGucci on November 24, 2017, 11:29:29 AM

Quote from: xerox on November 23, 2017, 19:18:09 PM

My problem has been solved!
In fact I have not started the scenery configurator after the installation. Now by starting it gave me a message to increase the mess resolution below 5m in the P3D. I did it and now the scenery looks perfect!

Thanks,
Tibor

That is extremely strange. The installer should run the configurator automaticaly.

Title: Re: No buildings, no lights
Post by: keino333 on December 02, 2017, 19:29:10 PM

Quote from: tsGucci on November 24, 2017, 11:29:29 AM

That is extremely strange. The installer should run the configurator automaticaly.

In respect to that, I must ask if the installer adds anything to the P3D.cfg?  The reason for my question is that typically after installing say 5 addon scenery, I routinely dump the cfg and let p3dv4 rebuild on startup.  This ensures that i keep it clean and issue like ctds or blurries are kept to an absolute minimum.

Title: Re: No buildings, no lights
Post by: tsGucci on December 02, 2017, 20:58:21 PM

Quote from: keino333 on December 02, 2017, 19:29:10 PM

In respect to that, I must ask if the installer adds anything to the P3D.cfg?  The reason for my question is that typically after installing say 5 addon scenery, I routinely dump the cfg and let p3dv4 rebuild on startup.  This ensures that i keep it clean and issue like ctds or blurries are kept to an absolute minimum.

No. We don't change anything just read the file to check the mesh setting.