Author Topic: Prepar3D v4 - 64 bit architecture  (Read 99549 times)

Offline Harry320

  • Valued Customer
  • Newbie
  • *****
  • Posts: 4
Re: Prepar3D v4 - 64 bit architecture
« Reply #60 on: October 15, 2017, 11:13:44 AM »
Hi,

still no Buildings

if i copy the LHBP_objectPlacer_ucs2.dll to my P3DV3\ Modul Folder and rename it to LHBP_objectPlacer.dll
and start P3DV3, the sim will be closed with an Error Message - this is normal because it is an 64-bit file.

But the point is, that the LHBP_objectPlacer.dll will load via dll.xml

If i start P3DV4 with the LHBP_objectPlacer_ucs2.dll, this dll will not load (tested with LoadedDllsView.exe)
The Entry in my dll.xml is correct.

Now i have copied the LHBP_objectPlacer.dll from my P3D\Modul-Folder to my P3DV4\Modul-Folder and renamed it to LHBP_objectPlacer_ucs2.dll

Started P3DV4 and thought P3DV4 will will closed with an Error Message - but nothing - no Error.

This LHBP_objectPlacer_ucs2.dll will not load also.

I don't understand why P3D will not load the LHBP_objectPlacer_ucs2.dll.

Best regards

Harald

Offline tsGucci

  • Administrator
  • Hero Member
  • *****
  • Posts: 4.538
    • LHSimulations
Re: Prepar3D v4 - 64 bit architecture
« Reply #61 on: October 15, 2017, 21:22:03 PM »
First changed the DLL but is not working.
Made a new installation received a code 303 serial banned.
Please reactivate my serial.
Thank you.

Vincenzo Lofaro

I have unlocked your code. You may reinstall or run the LHSproductact.exe in your [FS]\Addon scenery\LHS_LHBP_X folder.

Lima Hotel Simulations - Flight Simulator scenery design for Hungary

Offline tsGucci

  • Administrator
  • Hero Member
  • *****
  • Posts: 4.538
    • LHSimulations
Re: Prepar3D v4 - 64 bit architecture
« Reply #62 on: October 15, 2017, 21:31:03 PM »
Hi,

still no Buildings

if i copy the LHBP_objectPlacer_ucs2.dll to my P3DV3\ Modul Folder and rename it to LHBP_objectPlacer.dll
and start P3DV3, the sim will be closed with an Error Message - this is normal because it is an 64-bit file.

But the point is, that the LHBP_objectPlacer.dll will load via dll.xml

If i start P3DV4 with the LHBP_objectPlacer_ucs2.dll, this dll will not load (tested with LoadedDllsView.exe)
The Entry in my dll.xml is correct.

Now i have copied the LHBP_objectPlacer.dll from my P3D\Modul-Folder to my P3DV4\Modul-Folder and renamed it to LHBP_objectPlacer_ucs2.dll

Started P3DV4 and thought P3DV4 will will closed with an Error Message - but nothing - no Error.

This LHBP_objectPlacer_ucs2.dll will not load also.

I don't understand why P3D will not load the LHBP_objectPlacer_ucs2.dll.

Best regards

Harald

Still not showing terminal, just tubes are visible. P3D V4.1 :( I wonder if it is because LHsimulation LHBP isn't available from P3DV4.1 top selection menu Add-ons, in P3DV3 it can be selected and scenery works. So DLL isn't loading in P3D V4 for some reason even when it is clearly shown in P3D dll...

 <Launch.Addon>
    <Name>LHBP_objectPlacer.dll</Name>
    <Path>Modules\LHBP_objectPlacer.dll</Path>
  </Launch.Addon>

I'm a little bit clueless what is going on here. For me Build 12 works like a charm.

Maybe in the recent installations there is mixing up something. My reccomandation to make a clean installation for LHBP.

Do the following:
1. Go to [Prepar3Dv4 folder]\Addon scenery and delete the LHS_LHBP_X folder
2. Go to [Prepar3Dv4 folder]\Modules folder and delete any file with LHBP_objectPlacer.......dll ! Leave no LHBP dll in the folder.
3. Go to %appdata%\Roaming\Lockheed Martin\Prepar3D v4 folder open the dll.xml and delete the
Code: [Select]
<Launch.Addon>
      <Name>LHBP_objectPlacer_ucs2.dll</Name>
      <Disabled>False</Disabled>
      <Path>Modules\LHBP_objectPlacer_ucs2.dll</Path>
      <Commandline></Commandline>
   </Launch.Addon>
any content from <Launch.Addon> until </Launch.Addon> if LHBP_objectPlacer is there. If this is the only dll loaded in your dll.xml you can delete the whole dll.xml too or just rename it to dll.bak.
4. Launch REGEDIT and in HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\LHSimulations\LHBP delete the RegP3D4 key. You can even delete the VerP3D4, InstDirectP3D4 and DateP3D4 if you want.
5. Do the installation with the Build 12 file: "Budapest_LHBP_v13_FSX(SE)_P3D_Build12.exe" Download from here: https://drive.google.com/file/d/0B3PRo0hefj60bTM1TUtiUllXQlU/view?usp=sharing

Thanks a lot!


Lima Hotel Simulations - Flight Simulator scenery design for Hungary

Offline Miksu1977

  • Jr. Member
  • **
  • Posts: 11
Re: Prepar3D v4 - 64 bit architecture
« Reply #63 on: October 15, 2017, 22:52:14 PM »
I'm a little bit clueless what is going on here. For me Build 12 works like a charm.

Maybe in the recent installations there is mixing up something. My reccomandation to make a clean installation for LHBP.

Do the following:
1. Go to [Prepar3Dv4 folder]\Addon scenery and delete the LHS_LHBP_X folder
2. Go to [Prepar3Dv4 folder]\Modules folder and delete any file with LHBP_objectPlacer.......dll ! Leave no LHBP dll in the folder.
3. Go to %appdata%\Roaming\Lockheed Martin\Prepar3D v4 folder open the dll.xml and delete the
Code: [Select]
<Launch.Addon>
      <Name>LHBP_objectPlacer_ucs2.dll</Name>
      <Disabled>False</Disabled>
      <Path>Modules\LHBP_objectPlacer_ucs2.dll</Path>
      <Commandline></Commandline>
   </Launch.Addon>
any content from <Launch.Addon> until </Launch.Addon> if LHBP_objectPlacer is there. If this is the only dll loaded in your dll.xml you can delete the whole dll.xml too or just rename it to dll.bak.
4. Launch REGEDIT and in HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\LHSimulations\LHBP delete the RegP3D4 key. You can even delete the VerP3D4, InstDirectP3D4 and DateP3D4 if you want.
5. Do the installation with the Build 12 file: "Budapest_LHBP_v13_FSX(SE)_P3D_Build12.exe" Download from here: https://drive.google.com/file/d/0B3PRo0hefj60bTM1TUtiUllXQlU/view?usp=sharing

Thanks a lot!

Did all that and rebooted, installed using build12 and now it's even worse than before, even tubes aren't showing anymore :(

Offline Ifikratis

  • Newbie
  • *
  • Posts: 7
Re: Prepar3D v4 - 64 bit architecture
« Reply #64 on: October 16, 2017, 00:13:03 AM »
Hello,

I'd love to confirm tsGucci, but unfortunately the people are right. I am coming from a complete computer format and clean install of P3D v4.1 . Running the built 12 installer results in no buildings at the airport. I hope it can be fixed soon.

Offline ShawnG

  • Newbie
  • *
  • Posts: 2
Re: Prepar3D v4 - 64 bit architecture
« Reply #65 on: October 16, 2017, 01:43:25 AM »
Hi!  attempting to install and test, and I have the dreaded 303 error when activating,  can you reactivate me just using my info I registered with, or do you need the serial?

Thanks!

Shawn Gray

Offline CYRUS

  • Jr. Member
  • **
  • Posts: 11
Re: Prepar3D v4 - 64 bit architecture
« Reply #66 on: October 16, 2017, 13:16:31 PM »

Hello, after the re-installation according to the last instructions, nothing has changed, the buildings are still missing, that is, imperfect work, to be honest, I do not really enjoy it  :'(

Offline Harry320

  • Valued Customer
  • Newbie
  • *****
  • Posts: 4
Re: Prepar3D v4 - 64 bit architecture
« Reply #67 on: October 16, 2017, 17:17:19 PM »
hello, same as above!

had followed all instructions.

If i start Prepar3D V3, the file LHBP_objectPlacer.dll is loaded.

But if i start Prepar3D V4 for some reason, the LHBP_objectPlacer_ucs2.dll is not loaded.

No LHBP_objectPlacer_ucs2.dll is loaded i get no buildings- right?

See my Attachements

Best regards

Harald





Offline tsGucci

  • Administrator
  • Hero Member
  • *****
  • Posts: 4.538
    • LHSimulations
Re: Prepar3D v4 - 64 bit architecture
« Reply #68 on: October 16, 2017, 20:09:58 PM »
Hi!  attempting to install and test, and I have the dreaded 303 error when activating,  can you reactivate me just using my info I registered with, or do you need the serial?

Thanks!

Shawn Gray

Hello

Your code is not locked. 303 means it cannot download the file for some reason. COuld you please run the LHSproductact.exe in your [FS]\Addon scenery\LHS_LHBP_X folder with administrator rights?

Lima Hotel Simulations - Flight Simulator scenery design for Hungary

Offline tsGucci

  • Administrator
  • Hero Member
  • *****
  • Posts: 4.538
    • LHSimulations
Re: Prepar3D v4 - 64 bit architecture
« Reply #69 on: October 16, 2017, 20:10:55 PM »
I'm very sorry because of this hassle, I really apologize.

Could you please do some logging for us and send it to info@lhsimulations.com

Follow the second video here:

http://lhsimulations.com/forum/index.php?topic=436.0

Lima Hotel Simulations - Flight Simulator scenery design for Hungary

Offline slait

  • Valued Customer
  • Jr. Member
  • *****
  • Posts: 16
Re: Prepar3D v4 - 64 bit architecture
« Reply #70 on: October 16, 2017, 20:40:01 PM »
I have the same issue and attached are the logs. It does state:

0.68355 DLL Failed to load. Check for missing dependencies.
0.68358 DLL Load Failed:  Error=-3  Path="Modules\LHBP_objectPlacer_ucs2.dll"

EDIT: Files emailed as requested.
« Last Edit: October 16, 2017, 20:47:31 PM by slait »

Offline tsGucci

  • Administrator
  • Hero Member
  • *****
  • Posts: 4.538
    • LHSimulations
Re: Prepar3D v4 - 64 bit architecture
« Reply #71 on: October 16, 2017, 21:25:25 PM »
I have the same issue and attached are the logs. It does state:

0.68355 DLL Failed to load. Check for missing dependencies.
0.68358 DLL Load Failed:  Error=-3  Path="Modules\LHBP_objectPlacer_ucs2.dll"

EDIT: Files emailed as requested.

Thank you.

Lima Hotel Simulations - Flight Simulator scenery design for Hungary

Offline tsGucci

  • Administrator
  • Hero Member
  • *****
  • Posts: 4.538
    • LHSimulations
Re: Prepar3D v4 - 64 bit architecture
« Reply #72 on: October 16, 2017, 21:28:59 PM »
Just to show you, I'm not fooling around with you:


Lima Hotel Simulations - Flight Simulator scenery design for Hungary

Offline slait

  • Valued Customer
  • Jr. Member
  • *****
  • Posts: 16
Re: Prepar3D v4 - 64 bit architecture
« Reply #73 on: October 16, 2017, 21:30:00 PM »
Also, I'm seeing some failed calls from Prepar3D to VCRUNTIME140D.dll and MSVCP140D.dll. Are those Visual C++ distributables? I'm not sure if it is related.

Offline ShawnG

  • Newbie
  • *
  • Posts: 2
Re: Prepar3D v4 - 64 bit architecture
« Reply #74 on: October 17, 2017, 00:43:44 AM »
Hello

Your code is not locked. 303 means it cannot download the file for some reason. COuld you please run the LHSproductact.exe in your [FS]\Addon scenery\LHS_LHBP_X folder with administrator rights?

Thanks, but running as admin did not resolve, still getting 303.  Also tried disabling antivirus and Malwarebytes, still same issue.